The Rangextd Wireless extender provides you with an easy way to boost up the range connection and extend the wireless signal into the entire house. However, the Rangextd wireless extender is compatible with all types of internet service providers. Along with that, it can work with all the electronic devices and boost up the signal to cover 200 square feet of area. As it is the best wireless tool to eliminate all the dead zone areas from the house. Simply connect the Rangextd wireless device with any existing wifi router and it will start spreading the internet connection throughout the house.
The Rangextd wifi booster installation is convenient and effective as well. When you face any difficulty regarding the internet connectivity into the house then buy the Rangextd wireless extender and you can place it into your home where you do not get the signal range. Well, it is a good choice for those homes that significantly face poor or weak internet connections. IIt not only ensures that you receive an amplified signal but boosts the speed so that it can reach all the indoor and outdoor spaces.
Fixing the difficulties into the settings of the Rangextd Wireless extender
In order to fix the difficulties in the settings of the Rangextd Wireless extender, you have to set it up in a proper way. So that you won’t have any problems in the future. You can read this article to complete the setup process of the Rangextd Wireless device. However, you can configure the device with the help of the wireless router mode.
Rangextd Wireless Configuration with Router mode
In the configuration of the wifi router mode, it should be connected to the DSL or the cable modem with the help of the cable. With the use of internet access, the DSL modems help to share the internet connection with other wifi devices. Therefore, select the mode for the configuration of the device into the router mode. Then plug the device into the wall outlet. Therefore, join the RJ45 cable with the DSL modem. Once it is connected then open the web browser and type the default IP address 192.168.7.234 into the address bar and hit the enter button. Consequently, the login page appears and then you need to enter the password and click on the login button. After the login, you will be able to see the web page, simply click on the router button and press the start button. Therefore, you need to choose the WAN type connection.
After that, enter the SSID name and select an authentication mode to create the default password for the extender. After the WAN connection type, enter the PPPoE details with the details of the account and the password with the help of the ISP. After selecting the static IP address, then enter the IP address, default gateway, DNS, subnet mask, etc. After making changes click apply.
Unable to change the Management password? Then read this
Are you unable to change the admin management password? Then read this article, it will help you to resolve your issue. As you know that the default password is the admin and it displays on the login screen whenever you access the web browser. Moreover, there is a security risk when you change the default wireless password to access the login page. As it is a very important step, make sure that the wireless function of the extender is enabled.
In order to change the Rangextd password setup, tap on the password button on the settings of the management interface, and the message will display on the web screen. Hence, apply the settings of the device. In case you forget the existing default password, you need to reset the device by clicking the reset button. Just press the reset pinhole button for more than ten seconds and then release the button slowly. Therefore unplug the device after three seconds and then check the wireless network for more than thirty seconds and connect to the mobile or the computer device.
Are you looking for the Firmware upgrade solution for the Rangextd wifi range extender?
Here is the firmware upgrade solution for the wifi booster. It helps to replace the old features with new and enhanced features of the device. Use the firmware upgrade button to add the new and incredible features to the device. Firstly, click on the firmware upgrade which is located on the settings of the management interface and the message will display on the screen. Select the browse button to save the latest firmware file to update the system of the Rangextd wifi router.